Baader Planetarium

Baader Planetarium: Over 50 Years of Innovation in Astronomy

From accessories to turnkey observatories

The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.

More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).

Grid List

Set Descending Direction

81-100 of 687

  1.   Baader Tripod-Adapter Flange for Vixen Sphinx Mount

    Baader Tripod-Adapter Flange for Vixen Sphinx Mount

    # 2451107

    € 131.00 Price excl. German VAT tax (19%): € 110.08
    • suitable for Vixen Sphinx mount
    • suitable for the Baader T-Pod Aluminium Stativ 75-110mm and Baader Hardwood Tripods
    • also fits onto Vixen-, Bresser- or Sky-Watcher tripods
    • Attention: for Adaptation on Baader Short-Pillar III the Universal Flange-Basis (#2451155) is needed
    Learn More
  2.   2"a / T-2i Zero-length reducing piece (zero optical length)

    # 2454833

    € 29.00 Price excl. German VAT tax (19%): € 24.37
    • converts any 2" (SC) female thread into a T-2 (M42 x 0.75) female thread - without extending the optical length
    • initially manufactured to adapt our Hyperion Universal Zoom Mark IV onto any photographic T-2 thread (see animation on the right)
    • this adapter can also work as an expansion ring to convert a photographic T-thread into a male 2" SC thread
    • suitable for adaptation of any accessory with male T-2 connection thread, e.g. our VariLock 20-29mm and VariLock 29-46mm clamps
    • Adapter with continuous 2" male and T-2 female thread as well as two face holes (recommended mounting accessory: Adjustable pin type face wrench ø 2mm (#2450062 , € 17,-) )
    Learn More
  3.   Baader 2"/2" Inverter Ring with 48mm filter thread

    Baader 2"/2" Inverter Ring with 48mm filter thread

    # 1508020

    € 31.00 Price excl. German VAT tax (19%): € 26.05
    • Converts 2" female into 2" male thread
    • Internal M48 Filter thread for 2" filter
    • Can be used to connect Baader Hyperion Mark III Zoom directly to a Baader Star Diagnol gaining adfitional backfocus by swapping ClickLock-clamp for this adaptor.
    Learn More
  4.   T-2 Verlängerungshülsen (7.5 / 15 / 40 mm)
    From: € 22.00 Price excl. German VAT tax (19%): € 18.49
    • Z.B. zur Okularprojektion mit Schiebefokussierer
    • Teleskopseitig T-2 Innengewinde
    • Kamera-/Okularseitig T-2 Außengewinde
    • In verschiedenen Längen erhältlich
    Learn More
  5.   Battery set SR41W/1.55V 4pc for illuminator

    # 2454307

    € 6.00 Price excl. German VAT tax (19%): € 5.04
    • SR41W/1.55V 10 pc
    • For illuminator
    • Not for VarioFinder
    Learn More
  6.   M68a to FLI-Dovetail Adapter

    # 2458219

    € 186.00 Price excl. German VAT tax (19%): € 156.30
    • Baader M68a x 1 to FLI adapter flange
    • telescope-sided with M68 (Zeiss) male thread, to connect all parts of the Baader/Zeiss M68 System
    • camera-sided with Flange to connect FLI-ML and FLI-PL cameras
    • Optische height: 10,5 mm, Inner diameter (clear aperture): 64 mm
    Learn More
  7.   Reducer 2" / 1¼" for NT Steeltrack

    # 2408152

    € 27.00 Price excl. German VAT tax (19%): € 22.69
    • Special Reducer 2" / 1¼" with 4.5mm optical height only
    • Suitable for BDS-NT Diamond Steeltrack
    • Includes 2" Filterholder (M48 inner thread)
    Learn More
  8.   Sky-Surfer III – flat base adapter made of ABS

    # 2957302

    € 6.50 Price excl. German VAT tax (19%): € 5.46
    • Flat base plate made of ABS, for Sky-Surfer III standard finder
    • to mount onto large telescopes
    • Single price. Included in scope of supply of Sky Surfer III
    Learn More
  9.   Glasspathcorrector 1:1,25 for Baader-Binoviewer with T-2 thread (MaxBright® II and MaxBright®)

    # 2456314

    € 122.00 Price excl. German VAT tax (19%): € 102.52
    • Glasspathcorrector Factor 1,25. Optical path length: ≥ -30 mm
    • Insert diameter: ∅ 38 mm
    • Suitable to insert into the Baader MaxBright (Classic and MaxBright® II)
    • A Baader Glaspathcorrector is not a Barlow lens! The reason for this name (in Germany the name Glaswegkorrektor® is a protected trademark by Baader Planetarium) is only secondly the displacement of the focal point
    • A Glaspathcorrector is primarily intended to correct the prismatic color fringing that occurs on Refractors due to the high amount of glasses used in binocular prisms
    • Please note: The Baader MaxBright® II Binoviewer with case (#2456460 , € 479,-) is the only Baader-Bino where you can choose between Zeiss ring-dovetail and T-2 thread adapter.
    Learn More
  10.   Baader M48 Quick Changing Ring

    # 2958595

    € 52.00 Price excl. German VAT tax (19%): € 43.70
    • M48 male thread quick coupler with 50 mm dovetail
    • Creates a quick change and rotating device with standard load capacity when coupled with Baader M48 Heavy Duty Quick Changer (#2958590 , € 90,-) , part of Baader Heavy Duty M48 Quick Changing System (#2958593 , € 127,-)
    • Quick Changing Ring made from high performance steel
    • The changing system fits between any M48 connection
    • Optical length: 4mm
    Learn More
  11.   Baader Heavy Duty T-2 QuickChanger (T-2 part #06A)

    # 2456313A

    € 80.00 Price excl. German VAT tax (19%): € 67.23
    Learn More
  12.   Baader 3" Dovetail Bar (Losmandy)

    # 1501655

    € 95.00 Price excl. German VAT tax (19%): € 79.83
    • 3 inch dovetail plate
    • Length: 190mm
    • Very flat
    Learn More
  13. Baader Solar Continuum Filter 1¼" (double stacked)

    # 2458392

    € 180.00 Price excl. German VAT tax (19%): € 151.26
    • 1¼" Double Stacked Baader Solar Continuum Filter. 8nm / CWL 540nm.
    • Includes 1x AstroSolar® Photo Film OD 3.8 20x29 cm. The filter includes two Baader Solar Continuum Filters in a single filter cell which have been stacked for even higher contrast.
    • Enhances the contrast and reduces the effect of atmospheric turbulence.
    • This filter must be used in conjunction with a Baader Herschel Wedge or Baader AstroSolar® Safety Film 5.0 (not included) for solar observations otherwise equipment damage may occur. The included Baader AstroSolar® Photo Film 3.8 must not be used for visual observation but only for solar photography (e.g. lucky imaging).
    Learn More
  14.   Optical Spacer Ring 0,5mm – for FCCT

    # 2459080

    € 11.00 Price excl. German VAT tax (19%): € 9.24
    Learn More
  15.   Adapter 4.1"i UNF/24G to M68ix1 (for TEC 140-200 and 3.5" Feathertouch focusers)

    Adapter 4.1"i UNF/24G to M68ix1 (for TEC 140-200 and 3.5" Feathertouch focusers)

    # 2458191

    € 154.00 Price excl. German VAT tax (19%): € 129.41
    • Adapter with M68i x 1 (Zeiss) to 4,1"i UNF/24G for TEC 140 to 200 as well as Feathertouch 3,5" focusers
    • Provides an M68 female thread to fit the shortest version of 2" ClickLock clamp or FFC/M68 Adapter-System
    • Enables the connection of all M68 (Zeiss) system parts to the above mentioned focusers
    Learn More
  16.   V-Dove Tail orange anodized, 455mm, drilled for Celestron 9.25“ and 11“ SC / HD

    # 2451745

    € 85.00 Price excl. German VAT tax (19%): € 71.43
    Learn More
  17.   TurboFilm 127 x 51 cm, ND 0,1

    # 2459350

    € 34.00 Price excl. German VAT tax (19%): € 28.57
    • Baader Turbo Film 127x51cm (Optical Density: 0,1). Use to protect your telescope and optical equipment against dust and humidity – without reducing the optical quality
    • This is the essence of AstroSolar safety film. A highest precision, crystal clear material (not “Mylar”).
    • It is a monomer film which we found after thoroughly testing more than 200 different film samples on our Zeiss autocollimator. This film was used in german Science Institutes as optical membrane for nuclear and particle physics experiments. The basic substrate has been further refined and homogenized by a proprietary annealing process that was developed exclusively for us.
    • Due to these treatments Turbo Film attains perfect homogeneity and performs equal to a 1/10 wave plane parallel optical window. In fact it has the lowest wedge error of any existing optical window. TurboFilm will protect your valuable optical equipment, close telescope tubes against dust and humidity, greatly reduce air currents – all without reducing the optical quality of your telescope.
    Learn More
  18.   Reducing piece M100a (Alluna) / M68i

    # 2458241

    € 95.00 Price excl. German VAT tax (19%): € 79.83
    • Reducing piece for adapting the Alluna Optics M100 thread to the M68 system
    • Converts an M100a female thread to an M68 female thread
    • Telescope-sided: M100 x 1 male thread
    • Camera-sided: M68 x1 female thread
    • Aluminum, black anodized
    • Developed and manufactured in Germany
    Learn More
  19.   Baader Takahashi Adapter M72/M68 (Zeiss)

    Baader Takahashi Adapter M72/M68 (Zeiss)

    # 2558230

    € 63.00 Price excl. German VAT tax (19%): € 52.94
    • Combines Ultra Short 2 "terminal # 2458196, telescope with Carl Zeiss M68 threaded with Takahashi refractors
    • To connect Baader TAK adapter M72 / M68 to Takahashi Mewlon reflectors, you need the Takahashi Mewlon auxiliary adapter M71_i / M72_i (#2558231)
    Learn More
  20.   Guidescope-ring inner ring set for TEC140 and TEC 160 (various versions available)
    € 292.00 Price excl. German VAT tax (19%): € 245.38
    • Guidescope-ring inner ring set consisting of two rings for TEC 140 TEC APO 140 f/7 Fluorite Apochromat (#1351005 , € 10680,-) or TEC APO 160 f/7 Fluorite Apochromat (#1351010 , € 17600,-)
    • Suitable for Baader Guidescope rings BP III - 140-185mm (#1500203 , € 269,-) for tube diameter 140 mm - 185 mm
    • Massive, solid, turned aluminium rings with felt insert inside to avoid scratches on the tube
    • Width 28mm, suitable for Guidescope rings BP III
    • Support surface: 28mm
    • 6x brass thrust pieces, as replacement for the original thrust pieces of the Guidescope rings BP III
    Learn More

Grid List

Set Descending Direction

81-100 of 687