Baader Planetarium

• Precise focusing eyepiece holder 1¼"/T-2 (5mm focus travel)
• Requires only a slight turn of about 20" to securely lock any 1¼" eyepiece or accessory
• Eyepieces / CCD cameras sitting against rotation and are still not scratched!
• Telescope side with T-2 (M42 x 0.75) female thread.

• V-dovetail, 70mm diameter
• Pairing Vixen / Synta / SkyWatcher / Celestron / Baader V - for GIRO II
• Massive EQ-clamp, black anodized, Weight: 150g
• To accommodate all terminal strips of Vixen GP / GPDX, Bresser, Synta, Skywatcher
• Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)

• Dustcap with M48 female (inner) thread
• Robust cap made of black anodized metal
• Dustproof closure for your accessories of the M48 system

• Adapter 2.7"a UNF/24G (Astro Physics) to M68i x 1 (Zeiss)
• Reducing piece: converts an AP 2.7” female thread to an M68 x1 female thread

• Telescope adapter for Hedrick focuser 3.5" for PlaneWave CDK 14/17/20/24" to the Instrument Multi Port IMP85 (#2451300 , € 7950,-)
• Designed and manufactured in Germany
• Connections on camera side: 120 x 7.5 mm dovetail
• Black anodized
• Optical ength: 0.5 mm
• Internal and external diameter: D120a/ D82,5i

• made of V2A stainless steel
• Ø 140x30mm, bore Ø 28,7mm
• 3 kg

• M54 dustcap with S54a ring dovetail
• Robust cap made of black anodized metal
• Dustproof closure for the M54 Quick Change System

• Lockable T-2 extension tube, adjustable 20-29 mm with clamping
• Telescope-side connection dimension: T-2 (M42 x 0.75), Eyepiece connection dimension: Optional T-2 (M42 x 0.75) or T-2 Ring Schwalbe 52 x 6.5mm optical length: 20-29 mm continuously adjustable over millimeter scale
• Outer diameter: 50.8mm / 2 "inside diameter: with eyepiece side T-2 thread insert = 38mm with 52mm dovetail eyepiece sided = 42mm

• Adapter set to connect the Steeldrive II Motor Unit (#2957265 , € 275,-) to the FeatherTouch 3.5" focuser from Starlight Instruments
• Allows motorized fine drive of the FT 3.5" OAZ with the Baader Steeldrive II motor unit for heavy loads (up to 8 kg)
• Please note:: The motor unit requires the Steeldrive II Controller (#2957260 , € 445,-) . You always need one controller to operate one motor unit. But you can use one controller with several motor units one at a time – you only need to plug it into the motor unit which you want to use. The Steeldrive II Motor with Controller is also available as Set:  Steeldrive II motor focuser with Controller (#2957165 , € 665,-)

• Specially created for Hyperion ClickStop Zoom Mark III
• Result in a focal length range of 3,5 to 10,5 mm
• Modular Design: usable for many applications (visual and photographic)

• Baader IR-Pass Filer HWB 685nm
• Reduces the effect of seeing resulting in a much sharper image.
• Tip for use: Ideal for imaging and used for the luminosity channel.
• The effect of use: The normal spectral bandwidth is 400-700nm. This filter starts at 670nm in the deep red, just in the visual range so it can be focussed correctly. At this long-wavelength spectral range the atmospheric air turbulence (seeing) has much lower impact on the sharpness. Dark structures on Mars, Jupiter the Moon and the Sun are thereby rendered much sharper. The luminosity can then be combined with RGB creating a very sharp LRGB image.
• Highly recommended for any planetary imager.
• Reflex free anti-reflective and optically polished.

• To adapt DSLR T-Rings onto Clickstop-Zoom eyepiece
• The only ring with direct transition from the SP54 system thread to T-2a (M42x0.75)

• Baader O-III Narrowband Filter – Precision Grade
• 6.5 nm FWHM, recommended for optical systems from > f/3.4
• Reflex-Blocker™ hard coated and planeoptically polished – with sealed coating edges (Life-Coat™)
• Blackened edges all around, with filter-lead-side-indicator in the form of a telescope-sided black outer rim
• Optimized for modern CMOS cameras, but likewise excellent for CCD camera technologies

• for larger Celestron-Mounts
• Made for outdoor application, water resistant sealed housing. Usable in temperatures from -25°C up to 40°C
• input voltage 100-240V, Output 12.8V / 5A 60W
• Protective-disconnect ellbowed plug German design and quality with EU-wall plug

• Celestron Clean & Collimate (C&C) is only available in German language since this service can only be offered to customers that purchased their Celestron product from an authorized dealer in Germany. Please contact your local dealer - or Celestron.com for repair and service quotations

• Extension ring of 1 "C-mount female thread on T-2 external thread
• Allows very short connection

• Leveling-Weight Set developed for PlaneWave Direct-Drive mounts: for perfect balance in both axis
• Mounts directly to the standard screw mount of all Planewave's common telescopes via the straight mounting block.
• Weights can be mounted in horizontal position at the rear of the OTA both "top" and "bottom". This makes it possible to balance the telescope in the vertical position as well.
• The Planewave Leveling-Set consists of
  • 1kg Leveling Weight Ø 75 x 30mm (#2951390 , € 101,-)
  • 2.5 kg leveling counterweight Ø 75x75mm, made of V2A stainless steel (#2951402 , € 143,-)
  • 150mm counterweight-shaft M14, Ø 16mm (#2451554 , € 80,-)
  • Mounting block for leveling counterweight bar M14 for PlaneWave Instruments CDKs (#2451549 , € 48,-)

Successor model for GM 4000:
Stabilized Poser-Supply for10Micron GM 2000 / GM 3000 and 4000

The new control of the mounts is again significantly revised and stabilized, which allows us to become more efficient on the power supply side as well.

The Baader OTP 600W is no longer produced and therefore replaced by the Stabilized Power-Supply for GM 2000 / GM 3000 and GM 4000 (#1452070 , € 230,-)