Baader Planetarium
Baader Planetarium: Over 50 Years of Innovation in Astronomy
From accessories to turnkey observatories
The company Baader Planetarium is a middle sized enterprise having 50 years experience in producing and installing astronomical equipment.
More than 600 observatory domes of sizes from 2 m up to 8.5 m have been mounted, together with a large number of projection domes for planetarium installations up to 10 m in diameter. Observatory domes serve for a multitude of applications for scientific use around the world specialized to work under the hardest of environments, with installations in Antarctica (Dome C - 84°C) to high Arctic regions such as Svalbard (NyAalesund -45°C), Ellesmere Island (Eureca -60°C), in desert conditions with hermetic seals against dust and a number of high Alpine locations. Also the company specializes in high end robotic telescopes with apertures up to one meter as European sole distributor of Planewave Instruments USA, telescope mounts of varuious configurations, Echelle spectrographs featuring a resolution up to 20 000 lambda/delta lambda under Licence of MaxPlanck Institution(MPI).
-
# 1603321
€ 477.00 Price excl. German VAT tax (19%): € 400.84- Available again for a limited time: Carl Zeiss 1¼" Abbe Barlow lens with T-2 thread made in Germany by Carl Zeiss in Jena – with 1¼" / T-2 ClickLock eyepiece clamp by Baader Planetarium
- visual Barlow lens and photographic eyepiece projection in one system
- Direct T-2 Adaption possible - extends magnification up to 3x - without loss of quality
- The image quality is only exceeded by our 3x-8x flat field FFC-Converter, in case the projection factor exceeds 3x
-
- Improved version of former MX-Mount
- Artistry, vision and all the performance of a professional grade mount
- Designed to make observatory quality astronomy – field portable
- Control system of 4th generation, featuring USB 2.0 computer to mount interface
-
# 2459087
€ 38.00 Price excl. German VAT tax (19%): € 31.93- 3D-printed filter holder for unmounted Ø 31 x 2 mm Baader filters
- Fitting for Baader FCCT I for RASA 8" – suitable for Ø 77 mm QHY-Cameras (e.g. QHY 174 / 163 / 183) (#2459070 , € 295,-) and Baader FCCT II for RASA 8" – suitable for Ø 90 mm QHY-Cameras (e.g. QHY 268 / 294 / 533) (#2459071 , € 345,-)
- The built-in Neodymium magnets ensure that the filter drawer is always held in the same position and cannot fall out.
- With the filter extractor tool included in the scope of supply of the FCCT, the filter holders can be changed easily and safely
- Also available as set containing of four 31 mm filter holders: 4x filter holder 31 mm for Baader FCCT (3D-printed) (#2459097 , € 129,-)
-
# 2454500
€ 61.00 Price excl. German VAT tax (19%): € 51.26- Bayonet adapter to fit suitable 1¼" astro-eyepieces onto all Carl Zeiss Diascope Fluorit spotting scopes
- includes Allen Wrench key and two O-rings to adjust stiffness when switching eyepieces
- Please note: The adapter must not be inserted into the spotting scope without an eyepiece. Otherwise, you don‘t have enough grip to remove it.
-
# 2957235
€ 6.00 Price excl. German VAT tax (19%): € 5.04- Long, 1.5mm thick washer ("strip shims") to adapt Baader VersaBase to different tube sizes
- Dimensions: 110 x 12 x 1.5 mm (length x width x height)
- Already included four times in the BDS-NT or Baader VersaBase (the base of our BDS-NT Diamond Steeltrack®) scope of delivery
- Only suitable for BDS-NT Diamond Steeltrack® for Newtonians
-
# 2457000
€ 34.00 Price excl. German VAT tax (19%): € 28.57- Standard base viewfinder mounting Pairing MQR III, IV MQR, SkySurfer 5 for mounting on the "second telescope" and for all Vixen-style finderscope mount bases
- The Baader standard basis is milled from solid (no cheaper casting), adjusts all Tubusradien and can be with two screws in the slots - but also with a single screw in the center - absolutely firmly attach.
- The base plate is milled sinusoidal and forms on each tube radius 130-400 mm diameter two linear runs. This provides maximum stability.
- Hole spacing: for attachment onto a telescope OTA, the Baader-Standard-Base has two long-holes of 14 mm length each and 5.3mm width, The middle spacing between both holes is 36 mm. Accordingly the center spacing distance of two 5mm screws may vary from 26 mm to 46 mm
-
# 2458228
€ 55.00 Price excl. German VAT tax (19%): € 46.22- Reducing piece: M68a to M62a for direct connection of M62 accessories (e.g. QHY Color Filter Wheel (CFW 3) (various versions available) ) to the M68 system
- Chonverts the M68 (Zeiss) female into a M62 male thread
- Telescope side M68 male thread, eyepiece side M62 male thread
- Optical length: 5 mm
- Inner diameter: 59 mm, outer diameter: 76 mm
-
# 2458060
€ 48.00 Price excl. German VAT tax (19%): € 40.34- DT Adapter III, M68a / SP54a extension adapter M68
- Digital T Adapter System III of M68_a on SP54_a Shortest adaptation for Telecentric system or the fluoride Flatfield Converter (FFC).
- This adapter fits to the M68 (Zeiss) ring system - see at FFC (fluorite Barlow) -. Eg to a DSLR camera using the digital T-rings to mount the FFC as short as possible.
-
# 2451525
€ 219.00 Price excl. German VAT tax (19%): € 184.03- Quick mounting of optics with all EQ standard Celestron / Skywatcher / Vixen dovetail
- Massive but lightweight EQ-clamp, 190 mm (7.5") long w. multi-contact ribbed dovetail face
- Bottom side featuring various predrilled hole patterns to fit onto DEC-face of most mounts (Takahashi, 10Micron, Astro-Physics, Vixen, Celestron)
- With an integrated 3 "dovetail, suitable for all mounts with 3" (Losmandy). Can therefore also be used for adapting telescopes with attached Vixen rails to 3" clamps
- Recommended accessory: 3D-printed ring-wrench for Baader Pan EQ- clamps (#2450071 , € 12,-)
-
# 2458593
€ 101.00 Price excl. German VAT tax (19%): € 84.87- The two-piece pipe clamp has at the bottom of a 3/8 "thread (a reducer to 1/4" is included) Only in connection with the DADOS slit spektrograph available
- On the top of the pipe clamp has a further 1/4" thread
- The terminal is suitable to attach a telescope as an additional device
- The clip is a must for physics lessons with optimal grip on the optical bench or in any other test setups.
-
# 2000315
€ 55.00 Price excl. German VAT tax (19%): € 46.22- Complete packaging for The Original: Baader Planetarium (#2000000 , € 2450,-)
- Already 1x included with the planetarium
-
# 2458215
€ 58.00 Price excl. German VAT tax (19%): € 48.74- To mount #24580-35/-36 DSLR T-Rings with 2 Filter compartment onto Zeiss M68 System
- Medium Format T-adapter M68
- Adapter for System M68 (Zeiss)
- M68 - 6x6 T adapter V-mount dovetail
-
# 2957297
€ 108.00 Price excl. German VAT tax (19%): € 90.76- Adapter to connect the 2" BDS-SC Baader Diamond Steeltrack® Focuser (#2957220 , € 365,-) onto M48-threads
- only suitable for BDS-SC Diamond Steeltrack® focuser
- optical length: 35 mm
-
# 2951401
€ 57.00 Price excl. German VAT tax (19%): € 47.90- made of V2A stainless steel
- with 1¼" thread (male/female) – to mount on top of Dovetail Clamp V or 3" Rider clamp (several weights may be combined)
- 1 kg
-
# 2958770
€ 38.00 Price excl. German VAT tax (19%): € 31.93- Nosepiece 2" to M54a, ultra-hard with Safety-Kerfs
- Focus-sided M54 male thread
- Telescope-sided 2" barrel with 2" filter thread (M48)
- Insert depth 23 mm, optical path length 4,3mm
-
# 2956214
€ 83.00 Price excl. German VAT tax (19%): € 69.75- Precise machined 2 "to 1¼" reducer to complete the Baader ClickLock system inserted height only 9.5mm
- Requires only light pressure on the ratchet lever to have an extremely strong hold
- ClickLock compression ring made of hardened Bronze ensures lifetime non-marring operation
- T-2 (M42x0,75) inner photo-thread attaches onto most T-2 threaded accessories and all Baader T-2 diagonals
-
# 2451557
€ 290.00 Price excl. German VAT tax (19%): € 243.70- Intermediate plate is connected to the side (slidable via slotted holes) to the Baader heavy-duty 8" double mounting plate, for up to 100kg (#2451559 , € 730,-) , that allows easy raising and laterally variable displacement of clamps if the distance is not enough.
- Suitable for all Pan EQ clamps (190mm, 230mm und 370mm) and Pan Adjuster for adjusting the optical axis of parallel mounted telescopes (#2451515 , € 1185,-) .
- Can be stacked if needed.
-
# 2956155
€ 95.00 Price excl. German VAT tax (19%): € 79.83- 45 ° an erecting prism Amici
- Including 2x Glaswegkorrektor ™ (Glass Path Corrector) and 1¼ "barrel
- Suitable for all SC telescopes and refractors
- Only suitable for Baader Maxbright Binocular
-
From: € 89.00 Price excl. German VAT tax (19%): € 74.79
- Baader Contrast Booster® Filters completely eliminates false colour
- Removes the bluish "hue" (=lack of contrast) during lunar, planetary, solar and terrestrial observation
- Boosts contrast and sharpness for fast achromatic telescopes - with over 95% transmission
- Planeoptically polished, non-ageing sealed coating edges
- Removes unsharp stars images when using red-sensitive digital and CMOS-cameras
-
# 2958082
€ 22.00 Price excl. German VAT tax (19%): € 18.49- To connect Hyperion eyepiece to larger telescope systems
- For the DSLR 2 "filter holder
- For direct connection to all Hyperion eyepieces
- The Hyperion DT Ring SP 62i / M72A is also required